How to Build Zeppelin from Source

0. Requirements

If you want to build from source, you must first install the following dependencies:

Name Value
Git (Any Version)
Maven 3.1.x or higher
JDK 1.7

If you haven't installed Git and Maven yet, check the Build requirements section and follow the step by step instructions from there.

1. Clone the Apache Zeppelin repository

git clone https://github.com/apache/zeppelin.git

2. Build source

You can build Zeppelin with following maven command:

mvn clean package -DskipTests [Options]

If you're unsure about the options, use the same commands that creates official binary package.

# update all pom.xml to use scala 2.11
./dev/change_scala_version.sh 2.11
# build zeppelin with all interpreters and include latest version of Apache spark support for local mode.
mvn clean package -DskipTests -Pspark-2.0 -Phadoop-2.4 -Pr -Pscala-2.11

3. Done

You can directly start Zeppelin by running after successful build:

./bin/zeppelin-daemon.sh start

Check build-profiles section for further build options. If you are behind proxy, follow instructions in Proxy setting section.

If you're interested in contribution, please check Contributing to Apache Zeppelin (Code) and Contributing to Apache Zeppelin (Website).

Build profiles

Spark Interpreter

To build with a specific Spark version, Hadoop version or specific features, define one or more of the following profiles and options:

-Pspark-[version]

Set spark major version

Available profiles are

-Pspark-2.1
-Pspark-2.0
-Pspark-1.6
-Pspark-1.5
-Pspark-1.4
-Pcassandra-spark-1.5
-Pcassandra-spark-1.4
-Pcassandra-spark-1.3
-Pcassandra-spark-1.2
-Pcassandra-spark-1.1

minor version can be adjusted by -Dspark.version=x.x.x

-Phadoop-[version]

set hadoop major version

Available profiles are

-Phadoop-0.23
-Phadoop-1
-Phadoop-2.2
-Phadoop-2.3
-Phadoop-2.4
-Phadoop-2.6
-Phadoop-2.7

minor version can be adjusted by -Dhadoop.version=x.x.x

-Pscala-[version] (optional)

set scala version (default 2.10) Available profiles are

-Pscala-2.10
-Pscala-2.11
-Pr (optional)

enable R support with SparkR integration.

-Pvendor-repo (optional)

enable 3rd party vendor repository (cloudera)

-Pmapr[version] (optional)

For the MapR Hadoop Distribution, these profiles will handle the Hadoop version. As MapR allows different versions of Spark to be installed, you should specify which version of Spark is installed on the cluster by adding a Spark profile (-Pspark-1.6, -Pspark-2.0, etc.) as needed. The correct Maven artifacts can be found for every version of MapR at http://doc.mapr.com

Available profiles are

-Pmapr3
-Pmapr40
-Pmapr41
-Pmapr50
-Pmapr51

-Pexamples (optional)

Build examples under zeppelin-examples directory

Build command examples

Here are some examples with several options:

# build with spark-2.1, scala-2.11
./dev/change_scala_version.sh 2.11
mvn clean package -Pspark-2.1 -Phadoop-2.4 -Pscala-2.11 -DskipTests

# build with spark-2.0, scala-2.11
./dev/change_scala_version.sh 2.11
mvn clean package -Pspark-2.0 -Phadoop-2.4 -Pscala-2.11 -DskipTests

# build with spark-1.6, scala-2.10
mvn clean package -Pspark-1.6 -Phadoop-2.4 -DskipTests

# spark-cassandra integration
mvn clean package -Pcassandra-spark-1.5 -Dhadoop.version=2.6.0 -Phadoop-2.6 -DskipTests -DskipTests

# with CDH
mvn clean package -Pspark-1.5 -Dhadoop.version=2.6.0-cdh5.5.0 -Phadoop-2.6 -Pvendor-repo -DskipTests

# with MapR
mvn clean package -Pspark-1.5 -Pmapr50 -DskipTests

Ignite Interpreter

mvn clean package -Dignite.version=1.9.0 -DskipTests

Scalding Interpreter

mvn clean package -Pscalding -DskipTests

Optional configurations

Here are additional configurations that could be optionally tuned using the trailing -D option for maven commands

Spark package

spark.archive # default spark-${spark.version}
spark.src.download.url # default http://d3kbcqa49mib13.cloudfront.net/${spark.archive}.tgz
spark.bin.download.url # default http://d3kbcqa49mib13.cloudfront.net/${spark.archive}-bin-without-hadoop.tgz

Py4J package

python.py4j.version # default 0.9.2
pypi.repo.url # default https://pypi.python.org/packages
python.py4j.repo.folder # default /64/5c/01e13b68e8caafece40d549f232c9b5677ad1016071a48d04cc3895acaa3

final URL location for Py4J package will be produced as following:

${pypi.repo.url}${python.py4j.repo.folder}py4j-${python.py4j.version}.zip

Frontend Maven Plugin configurations

plugin.frontend.nodeDownloadRoot # default https://nodejs.org/dist/
plugin.frontend.npmDownloadRoot # default http://registry.npmjs.org/npm/-/
plugin.frontend.yarnDownloadRoot # default https://github.com/yarnpkg/yarn/releases/download/

Build requirements

Install requirements

If you don't have requirements prepared, install it. (The installation method may vary according to your environment, example is for Ubuntu.)

sudo apt-get update
sudo apt-get install git
sudo apt-get install openjdk-7-jdk
sudo apt-get install npm
sudo apt-get install libfontconfig
sudo apt-get install r-base-dev
sudo apt-get install r-cran-evaluate

Install maven

wget http://www.eu.apache.org/dist/maven/maven-3/3.3.9/binaries/apache-maven-3.3.9-bin.tar.gz
sudo tar -zxf apache-maven-3.3.9-bin.tar.gz -C /usr/local/
sudo ln -s /usr/local/apache-maven-3.3.9/bin/mvn /usr/local/bin/mvn

Notes: - Ensure node is installed by running node --version
- Ensure maven is running version 3.1.x or higher with mvn -version - Configure maven to use more memory than usual by export MAVEN_OPTS="-Xmx2g -XX:MaxPermSize=1024m"

Proxy setting (optional)

If you're behind the proxy, you'll need to configure maven and npm to pass through it.

First of all, configure maven in your ~/.m2/settings.xml.

<settings>
  <proxies>
    <proxy>
      <id>proxy-http</id>
      <active>true</active>
      <protocol>http</protocol>
      <host>localhost</host>
      <port>3128</port>
      <!-- <username>usr</username>
      <password>pwd</password> -->
      <nonProxyHosts>localhost|127.0.0.1</nonProxyHosts>
    </proxy>
    <proxy>
      <id>proxy-https</id>
      <active>true</active>
      <protocol>https</protocol>
      <host>localhost</host>
      <port>3128</port>
      <!-- <username>usr</username>
      <password>pwd</password> -->
      <nonProxyHosts>localhost|127.0.0.1</nonProxyHosts>
    </proxy>
  </proxies>
</settings>

Then, next commands will configure npm.

npm config set proxy http://localhost:3128
npm config set https-proxy http://localhost:3128
npm config set registry "http://registry.npmjs.org/"
npm config set strict-ssl false

Configure git as well

git config --global http.proxy http://localhost:3128
git config --global https.proxy http://localhost:3128
git config --global url."http://".insteadOf git://

To clean up, set active false in Maven settings.xml and run these commands.

npm config rm proxy
npm config rm https-proxy
git config --global --unset http.proxy
git config --global --unset https.proxy
git config --global --unset url."http://".insteadOf

Notes: - If you are behind NTLM proxy you can use Cntlm Authentication Proxy. - Replace localhost:3128 with the standard pattern http://user:pwd@host:port.

Package

To package the final distribution including the compressed archive, run:

mvn clean package -Pbuild-distr

To build a distribution with specific profiles, run:

mvn clean package -Pbuild-distr -Pspark-1.5 -Phadoop-2.4

The profiles -Pspark-1.5 -Phadoop-2.4 can be adjusted if you wish to build to a specific spark versions.

The archive is generated under zeppelin-distribution/target directory

Run end-to-end tests

Zeppelin comes with a set of end-to-end acceptance tests driving headless selenium browser

# assumes zeppelin-server running on localhost:8080 (use -Durl=.. to override)
mvn verify

# or take care of starting/stoping zeppelin-server from packaged zeppelin-distribuion/target
mvn verify -P using-packaged-distr

Analytics